NALONE - VIBRATEUR CLITORIAL FIFI

Discover a new concept, think what you see today? Nalone takes more care of where you are, just looking at a normal vibrator, with its interior technology at the service of the site.

Designed for Fifi, an external clitorial stimulator that was converted into a perfect toy for you to place. It is ergonomically designed for maximum contact with the clitoris, transmitting oscillating vibrations to your breast.

The silicone with which it is manufactured is safe and guarantees perfect stimulation.

Specifications;

• Material: Silicone and ABS
• Vibration modes: 7 sound vibration modes
• Maximum noise level: less than 50 dB
• Dimensions: 92 mm(L)x51 mm(D)
• Charging: lithium bacteria (USB charging cable included)
• 100% water resistant

① Vibrator point ② accessory connection cable ③ Vibrator point ④ Vibrator point ⑤ Encender/Apagar/avanzar vibrator mode accessory ⑦ accessory connector ⑥ Fi Fi Encender/Apagar/avanzar vibrator mode ⑧ Cargo port

Stimulation modes

• 1. Slow vibration
• 2. Media vibration
• 3. Rapid vibration
• 4. Vibration of medium pulses
• 5. Rapid pulse vibration
• 6. 2 long and long vibrations
• 7. Vibration by graduated pulses

How to use

• 1. To charge your vibrator, connect the charger's USB cable to a USB adapter (a 5V/1A adapter is recommended). Connect the other side of the USB cable to the base of the vibrator (at the bottom of the vibrator). When loading, there will be a blue light on the control panel to indicate that the load has been carried out. Once loaded, the light will already be on to indicate that it is on the list for use. Therefore, it is likely that the light will not come on for a few minutes.
• 2. To light the vibrator, press the button for 3 seconds.
• 3. If you press the button quickly , the vibrator will operate in manual mode. Please see that the button pulses“ will change the vibration mode, pass by all of them.
• 4. To activate the vibrator, keep it pulsing on the button for 3 seconds
• 5. To use the FiFi 2 accessory, connect the accessory to the base of FIFI 2 (Specification - Point 6. If you quickly press the button “ ”, the vibrator will start in manual mode. Make sure that the button pulses “ ” change the vibration mode, switch over to all of them
• 7. To connect the vibrator to the button, keep it pulsating for 3 seconds

Advertisements

1. ◆ Secure the vibrator to be loaded completely before use.
2. ◆ Clean/disinfect your vibrator with water templada and antibacterial jab.
3. ◆ Use water-soluble lubricants only. No use of massage oils, hand creams or other types of lubricants
4. .◆ When used, it is recommended to clean the vibrator to avoid bacterial growth.